faulty for solaris 11

-> start /SP/faultmgmt/shell Are you sure you want to start /SP/faultmgmt/shell (y/n)? y faultmgmtsp> fmadm faulty ------------------- ------------------------------------ -------------- ------- Time UUID msgid Severity ------------------- ------------------------------------ -------------- ------- 2015-01-16/17:55:26 f4ee56c-9fdd-ca19-efb5-ae39675dfee3 SPT-8000-PX Major Problem Status : open Diag Engine : fdd 1.0 System Manufacturer : Oracle Corporation Name : SPARC T8-2 Part_Number : 12345678+11+1 Serial_Number : 1238BDC0DF ---------------------------------------- Suspect 1 of 1 Fault class : fault.component.misconfigured Certainty : 100% Affects : /SYS/MB/CM1/CMP/MR3/BOB1/CH1/DIMM Status : faulted FRU Status : faulty Location : /SYS/MB/CM1/CMP/MR3/BOB1/CH1/DIMM Manufacturer : Hynix Semiconductor Inc. Name : 8192MB DDR4 SDRAM DIMM Part_Number : 70xx001,HMA4xxR7MFRxx-TFT8 Revision : 01 Serial_Number : 465769T+02xxx102WR Chassis Manufacturer : Oracle Corporation Name : SPARC T8-2 Part_Number : 12345678+13+2 Serial_Number : 1248DC140 Description : A FRU has been inserted into a location where it is not supported. Response : The service required LED on the chassis may be illuminated. Impact : The FRU may not be usable in its current location. Action : Please refer to the associated reference document at http://support.oracle.com/msg/SPT-8000-PX for the latest service procedures and policies regarding this diagnosis. faultmgmtsp> In this example, a fault is displayed that includes these

Default MTU change in solaris 11

dladm set-linkprop -t -p mtu=9000 igb0