SAN Switch update

firmwaredownload example:

switch:admin> firmwaredownload
Server Name or IP Address: IP.TO.SCP.SERVER
User Name: username
File Name: /path/to/v6.2.2e
Network Protocol(1-auto-select, 2-FTP, 3-SCP) [1]: 3
Password:
Server IP: IP.TO.SCP.SERVER, Protocol IPv4
Checking system settings for firmwaredownload...
System settings check passed.
You can run firmwaredownloadstatus to get the status
 of this command.
This command will cause a warm/non-disruptive boot on the switch,
 but will require that existing telnet, secure telnet or SSH sessions
 be restarted.
Do you want to continue [Y]: y
 Firmware is being downloaded to the switch. This step may take up to 30 minutes.
 Preparing for firmwaredownload...
 Start to install packages...
 dir ##################################################
 [[lots of these for all packets]] ##################################################
 [[also stuff like these are seen many times:]]
 warning: /etc/fabos/pki/switch.0.rootcrt created as /etc/fabos/pki/switch.0.rootcrt.rpmnew
 kernel-module-ipsec ##################################################
 Removing unneeded files, please wait ...
 Finished removing unneeded files.
All packages have been downloaded successfully.
 Firmware has been downloaded to the secondary partition of the switch.
 HA Rebooting ...