firmwaredownload example:
switch:admin> firmwaredownload Server Name or IP Address: IP.TO.SCP.SERVER User Name: username File Name: /path/to/v6.2.2e Network Protocol(1-auto-select, 2-FTP, 3-SCP) [1]: 3 Password: Server IP: IP.TO.SCP.SERVER, Protocol IPv4 Checking system settings for firmwaredownload... System settings check passed. You can run firmwaredownloadstatus to get the status of this command. This command will cause a warm/non-disruptive boot on the switch, but will require that existing telnet, secure telnet or SSH sessions be restarted. Do you want to continue [Y]: y Firmware is being downloaded to the switch. This step may take up to 30 minutes. Preparing for firmwaredownload... Start to install packages... dir ################################################## [[lots of these for all packets]] ################################################## [[also stuff like these are seen many times:]] warning: /etc/fabos/pki/switch.0.rootcrt created as /etc/fabos/pki/switch.0.rootcrt.rpmnew kernel-module-ipsec ################################################## Removing unneeded files, please wait ... Finished removing unneeded files. All packages have been downloaded successfully. Firmware has been downloaded to the secondary partition of the switch. HA Rebooting ...
